The slider sets the band as "Factory" or "Custom." As far as I know, this affects how the frequency is transmitted to the VTX, for example, via Smart Audio. Factory sends R1 to the VTX and Custom sends the specific frequency 5658 to the VTX. Therefore, anything the VTX doesn't directly recognize must always be "Custom". However, in general, you can't assume that the VTX can handle any frequency.
Posts by Schersch_2000
-
-
In addition to the description of the frequency settings, here are some useful VTX tables that can be set via Betaflight CLI
VTX Table for Happymodel Diamond F4 ELRS and X12 ELRS:
Code
Display More# vtxtable vtxtable bands 6 vtxtable channels 8 vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725 vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866 vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 5645 5885 5905 5925 5945 vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880 vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917 vtxtable band 6 LOWRACE L CUSTOM 5362 5399 5436 5473 5510 5547 5584 5621 vtxtable powerlevels 5 vtxtable powervalues 1 2 14 20 26 vtxtable powerlabels 0 RCE 25 100 400VTX Table for BetaFPV Air Brushless FC:
Code
Display More# vtxtable vtxtable bands 6 vtxtable channels 8 vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725 vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866 vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 5645 5885 5905 5925 5945 vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880 vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917 vtxtable band 6 LOWRACE L FACTORY 5362 5399 5436 5473 5510 5547 5584 5621 vtxtable powerlevels 5 vtxtable powervalues 1 2 3 4 0 vtxtable powerlabels 25 100 200 400 PIT -
Wir benötigen für unsere neuen Modellflugpiloten ein geeignetes Einsteiger Flachenflugmodell für die Hallensaison. Wer kennt etwas gutes, bzw. hat sogar einen Plan dafür
-
Sonic Modell - AR Wing Classic 900mm
An FPV wing had been on my to-do list for a long time. Since I didn't want to buy all new components to try it out, it made sense to use many components from the 5" drone sector. The AR-Wing from Sonic Modell was the perfect model for this. The flight controller from the drone range can be operated with INAV and offers sufficient UARTS, as well as servo and motor connections. With the 6S 1300mAh battery used, flight times of 10 minutes are easily possible. The maximum speed is around 170 km/h, although the ESC gets very hot at full throttle. I converted the voltage regulator for VTX and CAM on the FC to 6,0V by resizing the feedback resistors and use it as a BEC for the two servos. I cut away the originally intended FPV CAM holder and glued a self-printed CAM adapter into the Action CAM mount. I currently have an HDZero Whoop Lite VTX with an HDZero Micro V2 CAM installed, but this will soon be replaced with a DJI O4 Lite (Flywoo Wide Lense makes the FOV perfect ;-)).
Setup:
Flight Controller JHEMCU - F405 NOXE V2 (INAV Target: JHEMCUF405) ELRS Receiver BetaFPV - SuperD ESC Holybro - Tekko 32 35A - BL-Heli32 with ESC-Temetry FPV System HDZero Whoop Lite VTX and HDZero Micro V2 CAM Servo BEC JHEMCU - F405 NOXE V2 - VTX supply (10V converted to 6V) Servos Hitec - HS-5065MG ( i still had some of these, but some cheaper ones would also do the job ) GPS Walksnail - WS-M181 M10 GPS (compass is not used) Motor EMAX - Eco II 2306 1900KV Propeller Azure - 5145 Vanover Battery Tattu - 6S1300